Set Password and Screen Lock Rules
With Password & Screen Lock, you decide how strong device passwords must be and after how many minutes an unused screen locks. deeploi then sends these rules to every connected Mac, iPhone, and iPad.
Before you start
You see Controls in the left sidebar if deeploi manages your device settings centrally. You don't see Controls? Contact hello@deeploi.io. Windows devices are not covered by this control.
Step 1: Open Password & Screen Lock
- Click Controls in the left sidebar.
- Under System, click Password & Screen Lock.
- Pick the macOS tab or the iOS / iPadOS tab.
Each tab has its own rules and is saved on its own. A dot on a tab means it has changes you have not saved yet.
Step 2: Choose Your Rules
The page has two sections, PASSWORD and SCREEN LOCK. Most fields only appear once you turn on the switch above them. A field shows its default value the first time it appears.
| Field | Allowed values | Default |
|---|---|---|
| Require password | Enabled or Disabled. Turns on all password rules below. | Disabled |
| Minimum password length | 1 to 64 characters | 8 characters |
| Require complex password | Enabled or Disabled. Requires letters, numbers, and symbols, and blocks simple patterns like "123" or "CBA". | Disabled |
| Minimum number of complex characters | 1 to 16 characters. The number of symbols a password needs, such as "&", "%", "$", and "#". Shown when Require complex password is on. | 2 characters |
| Maximum failed login attempts | 0 to 20 attempts. 0 turns the setting off and shows Disabled. | 10 attempts |
| Enable password rotation | Enabled or Disabled. Makes employees change their password regularly. Marked Not Recommended, because it can lead to weaker passwords. | Disabled |
| Max password age | 1 to 730 days. Shown when Enable password rotation is on. | 365 days |
| Password history | 0 to 50 previous passwords that cannot be reused. 0 allows repeating passwords. Shown when Enable password rotation is on. | 2 previous passwords |
| Enable Auto-Lock | Enabled or Disabled. Turns on the screen lock rules below. | Disabled |
| Auto-lock after | 1 to 60 minutes without use until the screensaver starts. | 5 minutes |
| Grace period | Immediately, After 1 minute, After 5 minutes, After 15 minutes, or After 1 hour. How long the device can still be unlocked without a password after Auto-lock after has run out. | Immediately |
| Field | Allowed values | Default |
|---|---|---|
| Require password | Enabled or Disabled. Turns on all passcode rules below. | Disabled |
| Minimum password length | 1 to 64 characters | 8 characters |
| Require complex password | Enabled or Disabled. Requires letters, numbers, and symbols, and blocks simple patterns like "123" or "CBA". | Disabled |
| Minimum number of complex characters | 1 to 16 characters. How many characters must be a symbol or a capital letter. Shown when Require complex password is on. | 2 characters |
| Maximum failed login attempts | 0 to 20 attempts. 0 turns the setting off and shows Disabled. | 10 attempts |
| Enable password rotation | Enabled or Disabled. Makes employees change their passcode regularly. Marked Not Recommended, because it can lead to weaker passcodes. | Disabled |
| Max password age | 1 to 730 days. Shown when Enable password rotation is on. | 365 days |
| Password history | 0 to 50 previous passcodes that cannot be reused. 0 allows repeating passcodes. Shown when Enable password rotation is on. | 2 previous passwords |
| Enable Auto-Lock | Enabled or Disabled. Turns on the screen lock rules below. | Disabled |
| Auto-lock after | 1 to 60 minutes without use until the device locks. | 5 minutes |
| Grace period | Immediately, After 1 minute, After 5 minutes, After 15 minutes, or After 1 hour. How long the device can still be unlocked without a passcode after Auto-lock after has run out. | Immediately |
If you turn off Require password or Enable Auto-Lock, the fields below it are cleared when you save.
Step 3: Save and Follow the Rollout
Click Save Changes. This saves only the tab you are on. If you try to leave the page with unsaved changes, deeploi asks Leave with unsaved changes? first.
deeploi then sends the rules to your devices in the background. You can leave the page while it runs.
| What you see | What it means |
|---|---|
| Password & Screen Lock update queued. | Your changes are saved. The update waits to start. |
| Password & Screen Lock update started. | deeploi is sending the rules to your devices. |
| Password & Screen Lock update applied. | The update is done. Devices that are offline receive it once they come online. |
| Something went wrong while applying your changes. | No policy changes reached your devices. Click Try again. |
Important
Only one control change can run at a time. While another control's change runs, this page is locked and tells you which change it is waiting for. While your own change runs, you can't edit either tab. Wait until it has finished, then make your next change.
What Do Employees Notice?
The rules apply to the password employees use to unlock their Mac, or the passcode of their iPhone or iPad. If Require password is on and an iPhone or iPad has no passcode yet, the employee is asked to set one that meets your rules. With Enable Auto-Lock on, an unused screen locks after the minutes you chose, and employees unlock it with their password or passcode.
How Do I Check Which Devices Have the Rules?
Once Require password or Enable Auto-Lock is saved on a tab, a Compliance section lists the devices of that platform with their user and status.
| Status | What it means |
|---|---|
| Compliant | The rules are installed on the device. |
| Not compliant | The rules are not installed on the device yet. |
The Password & Screen Lock card on the Controls page shows Enabled, Partially enabled (on for one platform and off for the other), Disabled, or Not set up.
How Does This Work With ISO 27001?
The ISO 27001 device standard sets four of these fields for both tabs: Minimum password length, Require complex password, Maximum failed login attempts, and Auto-lock after. A value the standard set shows the tag Set by ISO 27001.
If one of these values matches the standard and you change it so it no longer does, the page warns: This setting no longer meets the ISO 27001 recommendation. The same warning appears when you turn off Require password or Enable Auto-Lock. After you save, the ISO 27001 card on the Controls page shows Not Configured.